Pilot Reactor

Specifications and Technical Parameters

Type

GSH-0~500L

Volume(L)

0~500L

Working pressure(MPa)

For 0~10L Negative pressure -0.1~45

For 10~500L Negative pressure -0.1~20

Working temperature(°C)

-196~400

Stirring speed(r/min)

0~500

Motor power(KW)

0.245~4

Heating power(KW)

0.8~36

Heating type

Electric heating, far infrared heating, high frequency heating.

Water, thermal oil or steam recycling through jacket.

Charging type

Charging from above, discharging from bottom or above.

Shaft

Adopt self-lubricating wear-resistant sleeve, suitable for mixing various media.

Stirring type

Anchor-type, frame-type, blade-type, turbine-type, scraper-type or modular-type.

Seal type

Magnetic seal, mechanical seal, packing seal, gasket seal.

Motor

General DC motor, DC servomotor or explosion-proof motor according to customers’ requirements.

Main material

Kettle material mainly use

0Cr18Ni9 (S30408), 00Cr17Ni14Mo2 (S31603), 0Cr18Ni10Ti (S32168), 1Cr18Ni9Ti (321), also can be produced by titanium (TA2), nickel, zirconium, hastelloy, etc, or lined with PTFE, PPL, PFA and Ni (Ni6) according to different requirements of reaction media.

Or use Cladding plate which combined by 2 above material.

Opening port of conventional kettle lid

Gas port and liquid port with needle valve, Bottom insert tube inserting the bottom, Solid charging port with flange or visual glass, Measuring and controlling temperature port with platinum resistance, Security blasting port with safety device and Pressure gauge, as well as cooling coil inlet and outlet inside the reactor with tap.

Controller Device

Equipped with automatic or programmed PID or PLC to achieve:

Temperature display and control, accuracy ± 1 ℃ (or ±0.1 ℃);

Mixing Speed display and control;

Pressure display and control;

Level display and control;

Flow display and control;

Valve open/close control, etc.

Other Accessories

We can design and manufacture various reactors as per customer’s request. If user have other special requirements on kettle cover, kettle body opening, internal structure, stirring paddle, and other supporting device (such as condensate return unit, constant feeding tank, receiver, condenser, etc.), we can help customer to achieve their request, can also equip necessary instruments as request.