Product details
CF550-800 hammer mill/ Wood Hammer Mill Introduction
Hammer mill is new-style and multipurpose machine, it is used for all kinds of straw , cotton stalk, alfafa, peants shell and foodstuffs etc.
Advantages
1. Driven by electric motor, the household hammer mill is easy to operate.
2. The hammer mill may powered with 2 electrodes motor that is driven by four B-type belt.
3.It will reduce lumber up to 50 mm diameter into 3-5 mm generally.
4. The screen sizes can be offered as per your
request.
Specification:
| Model | Power |
Wood capacity (kg/h) |
Feed capacity (kg/h) |
Packing size (cm) |
N/G weight (kg) |
| CF550 | 30KW/380V | 800-1200 |
1500-2000 | 124*97*108 | 620/650 |
| CF600 | 37KW/380V | 1000-1500 | 2000-2500 | 150*110*115 | 850/900 |
| CF800 | 55KW/380V | 1500-2500 | 2500-3500 | 180*130*120 | 1200/1300 |
The hammer mill is newly developed machine which is endowed with many advantages compared to other kind of crushers such as simple construction, convenient operation, high efficiency, saving power consumption, and safe condition. It is suitable to crush raw materials with small size such as tree branches, bamboo, wood scrap, cardboard, newspaper, straw, crop stalks, corn cobs and other biomass waste etc. After crushing, raw materials are uniform and with proper moisture content to meet further processing. With capacity 800-3500kg/h, it is can surely meet the production requirement in the farms, middle sized feeding factory or family.
Features of the hammer mill
1. With capacity 800kg-3500kg/h, this hammer mill can satisfy a large production demand on a daily basis.
2. The ability to change screen size from 1.5-10mm, the option of a variable speed frequency drive control, enable processing a variety of materials using the same hammer mill.
3. Both coarse and fine grinding can be realized through adjusting the gap between hammers and screen
4. The core part-the hammer flake is scientifically designed to have two concussion parts, thus when one part is worn out, you can turn over to use the other part.
5. The angle of the screen can be 180° which allows for high throughput at lower power consumption.
6. Equipped with air blower, the crushed material can be directly collected and transported to next machine for further processing.
7. The rotor of hammer mill operates at 3,500 RPM to produce high hammer tip speed, thus the finished powder can be uniform with a smaller size.
Photo:
